Maddie Cox (2146955) and Monika Ney (2150230)
A hitter
in volleyball needs to perform a successful spike in an attempt to win a point.
How can we determine what the preferred biomechanics are in order to achieve
this?
At the end of this blog you should be able to:
·
Understand the biomechanics involved within the
three main components of a volleyball spike.
·
Identify how performance of the volleyball spike
can be altered between preferred techniques within individuals.
·
Describe how the volleyball spike biomechanics can
be implemented in other sports to increase higher levels of performance.
Introduction:
Volleyball
is a fast-paced dynamic sport played both indoors and outdoors which involves
six athletes per team, which are divided by a net. The game commences with one
player who serves the ball over the net from behind the boundary line at the
back of the court. The receiving team must then use skills such as a dig, set
and spike to not allow the ball to be grounded on their side of the net
(Sport-information, 2015). Each team is allowed a maximum of three touches
before the ball has to be brought back to the opposing side. The three touches
are normally used to set the ball up for an attacking play. The attacking play
usually ends with the third touch being a spike to ground the ball within the
game. The spike plays a major role in a team’s offensive play and is also the
most dangerous weapon a volleyball team can utilise (Hsieh, 2006). The spike
requires a player to successfully perform correct timing and technique to
execute the movement. One of the crucial elements behind a successful spike is
the power behind the ball to create a fast ball speed as this will give the
opposing team less opportunity to return the ball. To deliver an efficient
spike, there are three main components which assist in the optimal delivery
(Mann, 2008). These include: the approach/run up, the jump, and the arm swing
which involves multiple biomechanical principles that will be covered in this
blog (Figure 1).
Figure 1.
Components of a volleyball spike. (Adapted from Hsieh, 2006).
Men vs
women net height:
The
Federation Internationale de Volleyball (2016) (FIVB, also known as the
International Volleyball Federation) state that the rules in Volleyball are the
same for both men and women but there is one noting difference which is the
height of the net. In the men’s competition, the net height is at 2.43m and
2.24m for the women’s competition which is a difference of 19cm (FIVB, 2016).
The height of the net must not surpass the official net height beyond 2cm,
therefore the net is measured with a measuring device from the centre of the
court for further precision (FIVB, 2016). The height of the net can affect the angular
velocity of the ball substantially when attempting to spike as it determines
whether a player can reach the net to aim the spike downwards. Further detail
will be discussed later in the blog.
Optimal
physique of volleyball players:
Elite
female volleyball players share physical characteristics that impact on their
role within the game, as well as their overall playing performance.
Martin-Matillas et al. (2013) highlight that top level players were taller, had
higher skeletal muscle mass and ectomorphy, and a lower level of adiposity
markers, compared to lower level players. Alexander et al. (2010) explains that
the physical characteristic of being tall within volleyball is a significant
advantage; this is due to tall players being able to produce more downward
force and angle on the ball, thus resulting in lower trajectory over the net
with greater speed. This in turn increases the possibility of grounding the
ball on the opponent’s side.
The
approach/ run up:
Within
the volleyball spike technique the approach is the first element. Studies have
acknowledged that the approach is a crucial influential variable to the second
element, the jump (Hsieh, 2006). A common approach consists of two to four
steps (Figure 2), the number of steps taken however varies based on the position of the
player on the court and their physical characteristics. Hsieh (2006) suggests
that the most important steps are the last two because they generate the most
momentum. When building momentum Gaudet (2014) suggests participants need to
lean their body slightly forward, in turn contributing to greater acceleration,
as it allows the participant to use their leg muscles to push off the ground,
thus accelerating them forward. Gaudet (2014) also acknowledges that
participants should decrease contact time between their feet and the ground,
this in turn reduces the average applied forces per stride, also increasing the
participant’s acceleration.
Figure 2.
Two step approach (top), four step approach (bottom). (Mann, 2008).
When
volleyball players are stepping forward during the approach the body has
kinetic energy (KE) which is the energy associated with motion, therefore; an
object with a greater mass or velocity has energy: KE= ½ mv2,
where m is the objects mass and v is its velocity (Blazevich,
2012). It is seen that an increase in mass has less effect than an increase in
velocity (I.e. the v is squared) (Blazevich, 2012). Thus faster moving
objects have greater kinetic energy (Blazevich, 2012).
Hsieh
(2006) further explains that when the volleyball player speeds up and gains
kinetic energy the player needs to transfer part of the kinetic energy into
potential energy on the final step of the approach to gain jump height, the
height of the jump is an indication of the potential energy gained (Blazevich,
2012).
Figure 3.
Spike approach footwork (horizontal to vertical momentum). (Adapted from Hsieh, 2006).
The Jump:
Following
the approach phase of the spike comes the jump or the take-off phase. In the
execution of a spike, the player must jump at a great distance into the air and
strike the volleyball at the maximum point of the jump in order to drive the
volleyball down rapidly towards the floor on the oppositions side of the net
(Hsieh, 2006). The height of the jump in this phase of the spike provides the
player with a more desirable attack angle to be able to hit the volleyball
downwards promptly into the opposition’s court (Hsieh, 2006). The height of the
jump can also provide adequate time for the player to determine how they are
going to play the ball (drive it down rapidly or a soft tap to avoid an
opposition’s block) (Hsieh, 2006). Newton’s Second Law of motion ‘the
acceleration of an object is proportional to the net force acting on it and
inversely proportional to the mass of an object’, is evident in the jump of a
spike as Force = Mass x Acceleration and to allow the body to change from
forward motion to vertical, the athlete must apply force into the court
(Blazevich, 2012). In this case the athlete plants both feet into the court
which transitions their forward motion from the approach to a vertical jump
(Blazevich, 2012). This is achieved by the player planting one foot on the
floor in front of them, then quickly planting the other foot alongside to push
off the ground (Hsieh, 2006). This is where Newton’s Third Law of motion comes
into place – ‘For every action, there is an equal and opposite reaction’. A
vertical force is applied as the feet are making contact to the court, an equal
and opposite reaction force is then exerted from the court which is also called
the ground reaction force (GRF), which blocks the feet from falling into the
Earth (Blazevich, 2012). As the court is exerting an equal and opposite
reaction, this allows the player to be accelerated back up (jump) to overcome
their inertia (Blazevich, 2012). However, to gain the maximum potential of the
jump, the athlete must plant both feet at once directly down into the court to
ensure the force applied back moves them straight up rather than forwards
(Figure 4).
Impulse is the product of Force x Time, therefore the larger the impulse, the larger the change in momentum will be (Coleman et al., 2007) meaning at the point of when the athlete is planting their feet into the ground, the largest force needs to be applied for the longest time possible as this will assist in transitioning the athlete’s horizontal velocity from the approach into vertical velocity for the jump (Blazevich, 2012). Also in this phase, the body’s centre of mass (COM) travels down at the start of the jump phase and then back up once the legs are extended and the feet have pushed off the court (Figure 5) (Hsieh, 2006). Gaining the maximum displacement at the COM following the vertical jump is one of the key goals of the spike jump (Hsieh, 2006). This vertical displacement at the COM is subject to the velocity of the take-off, due to conserving the total mechanical energy which can be changed only by the push against the court (McGinnis, 1999). Thus, when the athlete jumps into the air and is airborne, they are no longer applying force towards the court and the mechanical energy stays constant (Hsieh, 2006). Kinetic and potential energy is the subdivision of the total mechanical energy. While being airborne, the kinetic energy is turned into potential energy as a result of the force of gravity. In order for the athlete to gain maximum height of their jump, they must maximise the vertical kinetic energy throughout the phase of the take-off (Hsieh, 2006). The athlete will have more efficiency if they create ‘a greater kinetic energy for a smaller metabolic energy’ (Blazevich, 2012, p. 102). Finally, the jump is an open kinetic chain movement as the feet can move freely and is not fixed to an object and a distal to proximal sequence is used for the lower body as the hips are taking all the force (Blazevich, 2012).
Impulse is the product of Force x Time, therefore the larger the impulse, the larger the change in momentum will be (Coleman et al., 2007) meaning at the point of when the athlete is planting their feet into the ground, the largest force needs to be applied for the longest time possible as this will assist in transitioning the athlete’s horizontal velocity from the approach into vertical velocity for the jump (Blazevich, 2012). Also in this phase, the body’s centre of mass (COM) travels down at the start of the jump phase and then back up once the legs are extended and the feet have pushed off the court (Figure 5) (Hsieh, 2006). Gaining the maximum displacement at the COM following the vertical jump is one of the key goals of the spike jump (Hsieh, 2006). This vertical displacement at the COM is subject to the velocity of the take-off, due to conserving the total mechanical energy which can be changed only by the push against the court (McGinnis, 1999). Thus, when the athlete jumps into the air and is airborne, they are no longer applying force towards the court and the mechanical energy stays constant (Hsieh, 2006). Kinetic and potential energy is the subdivision of the total mechanical energy. While being airborne, the kinetic energy is turned into potential energy as a result of the force of gravity. In order for the athlete to gain maximum height of their jump, they must maximise the vertical kinetic energy throughout the phase of the take-off (Hsieh, 2006). The athlete will have more efficiency if they create ‘a greater kinetic energy for a smaller metabolic energy’ (Blazevich, 2012, p. 102). Finally, the jump is an open kinetic chain movement as the feet can move freely and is not fixed to an object and a distal to proximal sequence is used for the lower body as the hips are taking all the force (Blazevich, 2012).
Figure 5.
Centre of mass during the jump. (Adapted from Hsieh, 2006).
The arm
swing/ball contact:
The arm
swing is an influential component to the height of the spike jump (Hsieh,
2006). The maximum height (or vertical displacement) of the COM during the
spike jump can be increased by an arm swing prior to take off (Feltner et al.,
2004). By swinging the arms, this can assist in increasing the height and
vertical velocity and in turn the COM will reach peak height (Feltner et al.,
2004). During the jump phase of the spike, the athlete’s arm swings back in
preparation, which occurs during the last two steps of the approach phase
(Hsieh, 2006). During the last step of the approach, the athlete then begins to
swing the arms forwards and up as the athlete begins to change their horizontal
velocity into vertical velocity (Video 1) (Hsieh, 2006). In this movement, the
upper body uses a proximal to distal sequence as elastic energy is being
released and the arms also have the potential to create kinetic energy
(Blazevich, 2012). The influence of the pelvis, trunk rotation and trunk
flexion, shoulder internal rotation and elbow extension shows a positive effect
on the outcome of the ball velocity (Wagner et al., 2012).
Generally,
when an athlete spikes the ball, the optimal location for contact occurs above
and in front of the hitting shoulder (Video 2). When in contact, a flick of the
wrist should take place to allow for a downwards angle towards the court (Plawinski,
2008). A higher angular velocity is also produced from the elbow, meaning the
athlete has more chances of scoring as this results in a higher ball velocity
(Plawinski, 2008). The performance of the jump is enhanced while using the arm
swing, as the ankle and knee joints has an increase in angular velocities and
also increases in joint torques. This in turn, allows the power output to
increase which results in an increase in the height of the jump (Lees et al.,
2004).
Video 1. Arm swing.
Video 2. Ball contact.
The Magnus
effect:
The Magnus effect is a crucial lift force that allows athletes and sport participants to bend the flight of a ball. The Magnus effect can be seen at work in the curved flight path of balls that are thrown, hit or kicked with a spin (Human Kinetics, ND). The Magnus effect occurs when a 'spinning ball moves through the air, spinning a boundary layer of air that clings to the balls surface as it travels. On one side of the ball the boundary layer air collides with the passing air, in turn causing the air to decelerate and creating a high pressure area. On the other side of the ball, the boundary layer of air moves in the same direction as the passing air' (Human Kinetics, ND, p. 1), therefore; there is no collision and the air moves faster and sets up a low pressure area (Human Kinetics, ND). The difference in pressure on the opposing sides creates the lift force (Magnus effect), this in turn results in the ball moving in the direction of the pressure difference (i.e. from high to low) (Figure 6) (Human Kinetics, ND; Blazevich, 2012).
The Magnus effect is a crucial lift force that allows athletes and sport participants to bend the flight of a ball. The Magnus effect can be seen at work in the curved flight path of balls that are thrown, hit or kicked with a spin (Human Kinetics, ND). The Magnus effect occurs when a 'spinning ball moves through the air, spinning a boundary layer of air that clings to the balls surface as it travels. On one side of the ball the boundary layer air collides with the passing air, in turn causing the air to decelerate and creating a high pressure area. On the other side of the ball, the boundary layer of air moves in the same direction as the passing air' (Human Kinetics, ND, p. 1), therefore; there is no collision and the air moves faster and sets up a low pressure area (Human Kinetics, ND). The difference in pressure on the opposing sides creates the lift force (Magnus effect), this in turn results in the ball moving in the direction of the pressure difference (i.e. from high to low) (Figure 6) (Human Kinetics, ND; Blazevich, 2012).
The
Magnus effect can be used to manipulate a ball in any direction, resulting in
backspin, topspin and sidespin. Within volleyball, players can apply the Magnus
effect when spiking the ball. The effect results in top spin which can make the
ball drop suddenly when in flight, potentially grounding the ball on the opponent’s
side (Human Kinetics, ND). The technique in volleyball to perform top spin is
described as contacting the palm of the hand first and then wrapping fingers
over the top dragging the ball and creating the torque (Mann, 2008).
Figure 7. Hand placement to produce spin on the
volleyball. (Google, 2017).
Lastly the player must follow through with their arm which is brought down
and through the trunk of the side of the body to maintain momentum during the
spike (see video). The main aim of the follow-through is to maintain
technically clean and not violate a foul (net touch) (Plawinski, 2008). During
landing players need to absorb the shock of the impact, increasing recovery
time, by bending their knees (Mann, 2008).
Answer:
To successfully
execute a volleyball spike, with the aim of grounding the ball, a player must
execute the 3 main elements of the spike with the required biomechanical
principles in place. In the approach stage players must gain maximum momentum
to increase kinetic energy that can then be transferred into potential energy for the
jump. In the jump stage players need to apply force directly to the ground for an equal and opposite reaction force to transfer them into the jump. The jump can also be aided by the backwards arm swing to
propel the body into the vertical position. Within the contact stage,
during the downwards swing the hand must contact with the ball at the peak of
the jump, this in turn will transfer maximum amount of power to the ball.
Finally, the Magnus effect can alter the direction (swing) of the ball in the
desired direction. A player adding top spin can ultimately ground the ball
quickly and accurately. Overall this blog has demonstrated the importance
biomechanical principles play within the success of the volleyball spike.
Coaches and teachers who understand these principles can implement strategies
and activities to further develop player’s abilities and enhance overall game
performance.
How else can we use this information?
This information can be used to enhance performance in another volleyball
skill such as the overhead serve. The biomechanical principles discussed in the
spike are used in a similar manner while serving. Although this information has
only covered volleyball specifically, the biomechanics can also be utilised in
more sporting skills such as a tennis/badminton serve or an overhead smash. The
use of the upper-body biomechanics can be useful in trying to create more power
in the serve or the overhead smash as well as the Magnus effect to create a
spin on the ball. The information regarding the Magnus effect can also be
useful towards other sports which involve the possibilities of creating spin to
alter the outcome such as bowling in cricket, kicking in soccer and a slice in
tennis.
References:
Alexander, M., Honish, A., Canadian Sport Centre-Manitoba., Kennedy
Centre., & University of Manitoba. (2010). An analysis of the volleyball
jump serve. Sport Biomechanics Lab, University of Manitoba. Pp.2-17.
Blazevich,
A. (2012). Sports Biomechanics the Basis: Optimising human performance:
Bloomsbury Black Publishing.
Coleman,
S. G. S., Benham, A. S., & S. R. Northcott. (2007). A three-dimensional
cinematographical analysis of the volleyball spike. Journal of
Sports Sciences, 11(4),
295-302.
Feltner, M.E.,
Bishop, E.J., & Perez, C.M. (2004). Segmental and Kinetic Contributions in
Vertical Jumps Performed With and Without and Arm Swing. Research Quarterly for Exercise and Sport, 75 (3), 216-230.
F.I.V.B. (2016). Official Volleyball Rules 2015-2016. Retrieved
from https://www.fivb.org/EN/Refereeing-Rules/documents/FIVB_Volleyball_Rules_2015-2016_EN_V3_20150205.pdf
Gaudet, S. (2014). A physical model of sprinting. Journal of Biomechanics,
47(12), 2933-2940.
Hsieh, C.T. (2006).
Biomechanical and pedagogical analysis of the volleyball spike jump. University
of Northern Colorado.
Human Kinetics. (nd). Magnus Effect. Retrieved from http://www.humankinetics.com/excerpts/excerpts/magnus-effect-
Lees, A.,
Vanrenterghem, J., & Clercq, D. D. (2004). Understanding how an arm swing
enhances performance in vertical jump. Journal
of Biomechanics, 37, 1929-1940.
Mann, M. (2008). The Biomechanics of the volleyball spike/attack. Sport
Biomechanics.
Martin-matillas, M., Valades, D., Hernandez-Hernandez, E., Olea-Serrano,
F., Sjostrom, M., Delagado-Fernandez, M., & Ortega, B. (2014).
Anthropometric, body composition and somatotype characteristics of elite female
volleyball players from the highest Spanish league. Journal of Sports Sciences.
32 (2). 137-147.
McGinnis, P. M.
(1999). Biomechanics of sport and exercise. Champaign, IL: Human Kinetics.
Plawinski, M.P.
(2008). An analysis of the different spike attack arm swings used in elite
levels of men’s volleyball. Proquest
Dissertations and Theses.
Sports Information. (2015) Volleyball. Retrieved from http://sports-information.org/volleyball.htm
Wagner,
H., Pfusterschmied, J., Tilp, M., Landlinger, J., von Duvillard, S. P., &
Muller, E. (2014). Upper-body kinematics in team-handball throw, tennis serve
and volleyball spike. Scandinavian
Journal of Medicine & Science in Sports. 24(2), 345-354.
Images:
Google
image. (2017). Biomechanics of the
basketball lay up. Retrieved from: https://www.google.com.au/search?rlz=1C1CHBD_en-GBAU733AU733&biw=1600&bih=794&tbm=isch&sa=1&q=newton%27s+third+law+jump&oq=newton%27s+third+law+jump&gs_l=img.3...17218.18479.0.19122.0.0.0.0.0.0.0.0..0.0....0...1.1.64.img..0.0.0.qUhi27J_7p0#imgrc=AsbZtqxFG-ht3M:
Google image. (2017). The effects
of spin on a volleyball. Retrieved from: https://www.google.com.au/search?q=magnus+effect&rlz=1C1CHBD_en-GBAU733AU733&source=lnms&tbm=isch&sa=X&ved=0ahUKEwiBssOjjc7UAhWCE5QKHWIJDVQQ_AUICygC&biw=1600&bih=794#imgrc=UA5Mx0pWZzMwrM:
Google image. (2017). Biomechanics
blog: The Volleyball Spike. Retrieved from: https://www.google.com.au/search?q=hand+placement+to+produce+spin+on+volleyball&rlz=1C1CHBD_en-GBAU733AU733&source=lnms&tbm=isch&sa=X&ved=0ahUKEwj65_DRjc7UAhUBlZQKHURLCvcQ_AUICygC&biw=1600&bih=794#imgrc=qdInJgZQkCgZjM:








Comments
Post a Comment